FTTH Tools CFS-3
FTTH Tools CFS-3 three-port Fibre Stripper CFS-3 Wire Strippers/three hole stripper plier for wmiller
Product details
FTTH Tools CFS-3
Product Features:
1.The V port on the clamp edge is used for stripping the 250um, 500um coating and the 900um buffer layer accurately.
2.Holes will be 250 microns to 125 microns with coating stripping fiber.
3.Second holes will be 900 microns to 250 microns sleeve layer.
4.large aperture for stripping 2-3 mm cable sheath handle design.
5. 1.0mm diameter stripping hole at the tip of tool that can be used to strip the fiber jacket.
6.All cutting sections have precise mechanical tolerances to ensure clean and smooth operation.
7.Lock to hold tool closed when it is not in use.
1.The V port on the clamp edge is used for stripping the 250um, 500um coating and the 900um buffer layer accurately.
2.Holes will be 250 microns to 125 microns with coating stripping fiber.
3.Second holes will be 900 microns to 250 microns sleeve layer.
4.large aperture for stripping 2-3 mm cable sheath handle design.
5. 1.0mm diameter stripping hole at the tip of tool that can be used to strip the fiber jacket.
6.All cutting sections have precise mechanical tolerances to ensure clean and smooth operation.
7.Lock to hold tool closed when it is not in use.
8.Pre-set at the factory-no adjustments needed.
Parameter:
Name | Three-hole stripper |
Material | Antirust primer |
Length | 165mm |
Weight | 120g |
Related products
Inquiries